Variable Cubes

Work with the direction of the hinges. Twist so the top sides of the cubes to face each other. The leg of the inner support will snap when you'll free the cubes.

File Name File Size Downloads
DOWNLOAD NOW 950.41 Kb 1

Variable Cubes

V2 of my Infinite Torture Cube.
This one is not for the faint hearted.
The clearance between the cubes is only 0.1mm.
I don't own a fancy high end printer. Just a simple I3.
Print SLLLOOOOOWWWW and reduce 3-5% of your normal extrusion rate.

Good Luck!

I've added a test link so you'll be able to tune your print settings before the real thing.
This is one of the more challenging parts within the model (to print and clean).
The connection link should face up.
Work with the direction of the hinges. Twist so the top sides of the cubes to face each other. The leg of the inner support will snap when you'll free the cubes.
The pyramid that support the link from below is hollow. Use a wire cutter to cut it tip. Insert the cutter to the hole in order to firmly grasp the pyramid from the side, and twist to free it from the link.

Variable Cubes

Print Settings

Printer:

I3 Mega

Rafts:

No

Supports:

No

Resolution:

0.15 !!!

Infill:

50% and up

Filament: www.tesla-filaments.com PLA Black & Onix

Notes:

Print at 20mm/s, bridges at 10mm/s.

Custom Section

Use a wire cutter to remove the builtin supports.
With 0.15 layer height it's very easy.

File Information

File Name File Size Downloads
DOWNLOAD NOW 950.41 Kb 1

Last comments

Random 3D Models